KR01 Fixing Element – Dowel with Screw for Speed Bumps + Installation Guide

KR01 Fixing Element – Dowel with Screw for Speed Bump Installation

KR01 dowel with screw is designed for reliable fixation of rubber speed bumps and traffic calming devices to asphalt or concrete surfaces. The set ensures stability of the construction and safe operation of LP07 modules.

Technical Specifications

• Screw diameter: 8 mm
• Dowel diameter: 12 mm
• Length: 100 mm
• Required drill bit: Ø12 mm

Application

• For LP07 central section – 4 pcs of KR01 required
• For LP07 end section – 2 pcs of KR01 required

This fixing element allows for quick installation, high load resistance, and long service life.

Installation Guide

1. Mark the installation position of the module (central or end section).
2. Through the mounting holes, mark the drilling points on the surface.
3. Drill holes using a Ø14 mm drill bit to a depth of at least 120 mm.
4. Insert the dowels into the prepared holes.
5. Place the module in position and align the holes with the dowels.
6. Tighten the screws with a wrench or screwdriver until securely fixed.
7. Check the fixation strength before putting the speed bump into use.

Regularly check the fixation to ensure maximum durability and safety.

Advantages

• Full compatibility with LP07 modules
• Secure fixation on asphalt and concrete
• Simple step-by-step installation
• Durability against vibration and heavy loads