PT-K-600ml MS FIX – Adhesive for Tactile Tiles - buy

PT-K-600ml MS FIX – Adhesive for Tactile Tiles for Indoor and Outdoor Installation

The MS FIX 600 ml adhesive for tactile tiles is a professional single-component MS polymer-based adhesive designed for both outdoor and indoor applications. Certified according to EN 15651-1, category F INT-EXT / PW EXT-INT / XS3 CC, it ensures reliable bonding of tactile tiles to asphalt, concrete, granite, or ceramic surfaces without the need to remove existing pavement or flooring.

The adhesive features high thixotropy, excellent adhesion, and minimal shrinkage, providing a strong yet flexible bond with a wide range of materials. It is ideal for new construction as well as for renovation of sidewalks, ramps, pedestrian crossings, railway stations, pharmacies, schools, hospitals, hotels, and public buildings. MS FIX guarantees durable performance and quick installation without primer.

Reliable Solution for Urban and Public Infrastructure

The PT-K-600ml MS FIX adhesive allows the installation of tactile tiles directly on asphalt or concrete without damaging the existing surface. It is a modern, cost-effective solution for creating an accessible environment in cities, public areas, and buildings. Once cured, the adhesive forms an elastic joint resistant to moisture, UV radiation, temperature fluctuations, and mechanical stress.

This adhesive is used by contractors, construction companies, and municipalities for installing polyurethane tactile tiles on sidewalks, ramps, pedestrian zones, and indoor facilities. It is equally suitable for outdoor and indoor tactile tile installation.

Suitable Substrates

• Asphalt and bituminous surfaces
• Concrete and cement screed
• Granite, marble, porcelain stoneware, and paving tiles
• Metal, aluminum, galvanized and painted surfaces
• Plastic, polyurethane, PVC, and composite materials
• Natural stone and mineral bases

The adhesive provides strong bonding without primer to most construction materials. A primer may be recommended for very smooth or highly absorbent surfaces.

Application and Coverage

The surface must be clean, dry, and free from grease or dust. Recommended installation temperature: from +5 °C to +40 °C. Apply the adhesive in dots or strips using a professional applicator gun, then immediately press the tile firmly into place.

Chemical Consumption:

One 600 ml cartridge covers approximately 2.5 m² – about 27–28 tiles (300×300 mm) or 15–16 tiles (400×400 mm).

Curing Time:

• Skin formation: approx. 20 min (+23 °C, 50 % RH)
• Curing rate: approx. 3 mm / 24 h
• Full mechanical strength after 48 h at room temperature

Advantages of MS FIX 600 ml Adhesive

• Certified according to EN 15651-1 for indoor and outdoor use (PW EXT-INT)
• Ideal for polyurethane tactile tiles on asphalt, concrete, granite, and ceramic surfaces
• High adhesion, elasticity, and long-term durability
• Resistant to water, UV radiation, and atmospheric conditions
• Temperature range: –40 °C to +100 °C (short-term up to +120 °C)
• Solvent-free, silicone-free, and isocyanate-free – odorless and safe for indoor spaces
• Does not require primer for most substrates
• Recommended for hospitals, schools, pharmacies, hotels, and public facilities

Technical Specifications

• Type: thixotropic paste (MS polymer, single-component)
• Curing rate: approx. 3 mm / 24 h (at +23 °C and 50 % RH)
• Skin formation: approx. 20 min
• Shore A hardness (DIN 53505): ≈ 50 N/mm²
• Elastic modulus at 100 % (ISO 37 DIN 53504): ≈ 1.8 N/mm²
• Tensile strength (DIN 53504): ≈ 2.6 N/mm²
• Elongation: ≈ 270 %
• Application temperature: from +5 °C to +40 °C
• Temperature resistance: from –40 °C to +100 °C (short-term +120 °C)
• Composition: solvent-free, silicone-free, isocyanate-free

Application Recommendation

For professional use, it is recommended to apply the adhesive with a sealant gun for soft-pack cartridges (commonly known as “sausage” 600 ml), which ensures consistent flow and precise dosing of material. The combination of adhesive in “sausage” format and a professional gun provides clean, uniform, and reliable installation of tactile tiles both outdoors and indoors.